Mts WIFT Mini Transducer Interface User Manual Page 28
- Page / 86
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
SWIFT
®
Mini TI
28
Transducer Interface
Hardware Overview
TI Rear Panel
Transducer Interface Rear Panel
J1 Power connector Connect a power cable from the external power source.
J2 Output connector The J2 Output connector provides the conditioned sensor outputs that can be
connected to a data acquisition or test control system.
J3 Transducer
connector
Connect the data cable from the transducer slip ring to the Transducer Connector.
Transducers Designed
to Operate with a Low-
Profile TI but Using a
Mini TI
For SWIFT transducers designed to operate with a Low-Profile TI but are using
the Mini TI, an adapter cable is needed; MTS part number 100224052. The
transducer and shunt cables are connected to one end of the adapter cable and the
other end is connected to J3 of the Mini TI.
J3 Transducer
Connector
J2 Output
Connector
J1 Power
Connector
- Product Information 1
- Publication information 2
- Contents 3
- Installation 53 4
- Maintenance 71 4
- Troubleshooting 73 4
- Technical Support 5
- If You Contact MTS by Phone 7
- Before You Begin 9
- Conventions 10
- Mini TI 11
- Hardware Overview 13
- Overview 14
- Design Features 18
- Coordinate System 19
- “Transducer 20
- Specifications 21
- Calibration 22
- Manual shunt 23
- or 24
- Angular Velocity 24
- Coordinate 25
- High-Resolution 26
- Velocity Algorithm 26
- TI Front Panel 27
- TI Rear Panel 28
- Software Utilities 29
- Introduction 30
- Syntax ti2xfer 33
- More about TI2XFER 34
- Syntax ti2shunt 35
- Error Messages 38
- Transducer Interface Setup 41
- USB Driver Installation 42
- Select a Zero Method 44
- Calibration File Elements 45
- Upload the Calibration File 47
- Edit the Calibration File 48
- Description 49
- Download the Calibration File 52
- Installation 53
- Axes Icon 57
- Data Collection 61
- Road Simulator 63
- Zero the Transducer Interface 64
- Alternate zero procedures 67
- Zero the TI – one 68
- (unloaded) 68
- Maintenance 71
- Troubleshooting 73
- Signal Outputs appear to 76
- The reference angle of the 76
- value is 77
- value is set in the TI 77
- Troubleshooting Guide 78
- Shunt Calibration 79
- Errors reported when 81
- TI2STATUS is run 81
Related products and manuals for Hardware Mts WIFT Mini Transducer Interface
Hardware Mts Series 249 Swivels User Manual
(40 pages)
(40 pages)
Hardware Mts SWIFT 10 MC Sensor User Manual
(144 pages)
(144 pages)
Hardware Mts Criterion Series 40 User Manual
(48 pages)
(48 pages)
Hardware Mts Criterion Series 60 User Manual
(42 pages)
(42 pages)
Hardware Mts Criterion Series 40 User Manual
(142 pages)
(142 pages)
Hardware Mts Criterion Series 60 User Manual
(146 pages)
(146 pages)
Hardware Mts 85X Damper User Manual
(56 pages)
(56 pages)
Hardware Mts Landmark Tabletop User Manual
(122 pages)
(122 pages)
Hardware Mts TestLine User Manual
(132 pages)
(132 pages)
(32 pages)
Hardware Mts Attuatori serie 248 User Manual
(50 pages)
(50 pages)
Alto Audiomischer Benutzerhandbücher
Beginnend mit A
Comments to this Manuals