Mts 709 Alignment System User Manual download pdf (Page 105)

Concentric Adjustments

709 Alignment System Alignment Wizard

105

Concentric Adjustments

Concentric adjustments are done using the upper gauges (red) and lower gauges

(blue) as guides. In this discussion, the focus is on the upper gauges (red); the

blue gauges will typically be equally opposite on a central vertical axis. The

following paragraphs describe which adjustment screws to loosen/tighten

depending on the value of the upper (red) gauge reading. The goal of the

concentric adjustments on the 609 Alignment Fixture (C0, C90, C180, and C270)

is to adjust these screws to move the upper gauge reading and lower gauge

reading together so they line up on the same axis as close as practical. Following

is an example of the alignment wizard showing concentric adjustments.

There are two sections for the concentric adjustments:

• one for when the 609 alignment fixture is mounted to the crosshead

• one for when the 609 alignment fixture is mounted to the base

The difference between the two is that when the 609 alignment fixture is

mounted to the base, the instructions for the adjustments are reversed from when

it is mounted to the crosshead.

1 2 ... 100 101 102 103 104 105 106 107 108 109 110 ... 157 158

No comments

Mts 709 Alignment System User Manual Page 105